Summary You will serve as the Installation Environmental Program Director (IEPD) in the Environmental Division of the Public Works Department, NAVAL FACILITIES ENGINEERING COMMAND SE located in Gulfport, MS. Responsibilities You will coordinate actions with government and regulatory agencies, responsible parties, and contractors to meet the compliance requirements of environmental statutes and regulations. You will advise others on the implementation of environmental engineering or scientific policy and programs that comprise a spectrum of environmental issues that affect public health (e.g., air quality, waste water, hazardous waste). You will justify and allocate funding for use to promote or achieve environmental compliance. You will assess and review performance objectives and provide feedback to personnel. Oversee the compliance with environmental laws and regulations to reduce impact on installation operations. Supervise and lead others by motivating them towards a common goal. Requirements Conditions of Employment Qualifications This position has a Selective Placement Factor (SPF) if applying for the Environmental Engineer (0819) or Geologist (1350) series which is - current registration as a Professional Engineer (PE) or Geologist (RG) in any state, District of Columbia, Guam or Puerto Rico. You must provide a copy of your current registration with your application. In addition to the Basic Requirements or Selective Placement Factor for this position, your resume must also demonstrate at least one year of specialized experience at or equivalent to the GS-12 grade level or pay band in the Federal service or equivalent experience in the private or public sector performing duties such as: 1) Interpreting environmental laws, regulations and policies to ensure technical compliance with regulations; 2) Providing counsel and mentoring to lower graded professionals/technicians in the administration/management of an Environmental Program; 3) Providing input for programming, budgeting and execution of environmental programs; 4) Conducting environmental inspections to identify issues and provide recommendations for mitigation of those issues; and 5) Preparing and present reports, statements, spreadsheets and correspondence, using data from automated systems, related to environmental compliance/status. Additional qualification information can be found from the following Office of Personnel Management website: https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/#url=List-by-Occupational-Series https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/1300/geology-series-1350/ https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/1300/general-physical-science-series-1301/ https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/0800/files/all-professional-engineering-positions-0800.pdf https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/0800/environmental-engineering-series-0819/ Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. EDUCATION: Applicants must meet the following positive education qualifications requirements of the Office of Personnel Management (OPM) Qualifications Standards Manual: Applicants must possess: For the GS-0819, Professional Environmental Engineering Series: Have successfully completed a bachelor's degree (or higher) in engineering. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. Such education must demonstrate the knowledge, skills, and abilities necessary to do the work of the position. OR Have a combination of college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following: (I) Professional registration or licensure: Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration; or (II) Written Test: Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico; or (III) Specified academic courses: Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and in engineering that included the courses specified in the basic requirements under paragraph A (above). The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A (above); or (IV) Related curriculum: Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least one year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily, there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. Education EDUCATION (CONTINUED) For the GS-0401, Professional Biological Science Series: Have a degree in biological sciences, agriculture, natural resource management, chemistry, or a related discipline appropriate to this position OR Have a combination of education and experience in one of the above majors that includes at least 24 semester hours in biological sciences, agriculture, natural resource management, chemistry, or a discipline related to this position plus appropriate experience or additional education. The quality of the combination of education and experience demonstrates that I possess the knowledge, skills, and abilities required to perform the work of the position and is comparable to that normally acquired through the completion of a full four year course of study with a major as described above. For the GS-1350, Professional Geologist Series: Have successfully completed a degree in geology, plus 20 additional semester hours in any combination of mathematics, physics, chemistry, biological science, structural, chemical, civil, mining or petroleum engineering, computer science, planetary geology, comparative planetology, geophysics, meteorology, hydrology, oceanography, physical geography, marine geology, and cartography. OR Have successfully completed a combination of education and experience -- course work as shown in A above, plus appropriate experience or additional education. (Note: Acceptable experience may have been gained through geological field or laboratory work that provided a means of obtaining professional knowledge of the theory and application of the principles of geology and closely related sciences, e.g., geophysics, geochemistry, or hydrology. Such work generally must have involved making close observations, taking samples, handling various types of instruments and equipment, assembling geologic data from source materials, and analyzing and reporting findings orally and in writing. Experience that involved only one phase of geology work, e.g., collecting samples, would not be acceptable as providing the required professional knowledge of the theory and principles of geology. In some situations, professional scientific experience in other fields may be accepted in part as professional geological experience. Such experience must have been preceded by appropriate education in geology or by professional geological experience, and must have contributed directly and significantly to the applicant's professional geological competence. Examples include some positions in geophysics, mining engineering, soils science, physical oceanography, hydrology, climatology, biology, analytic or experimental chemistry, metallurgy, and comparable fields where the normal duties or results of investigations have been extended to the solution of geologic problems by the applicant. Ordinary functions of positions such as seismic, computer, petroleum or mining engineer, mine superintendent, or metallurgist generally are not considered professional geological experience. To receive credit for geological experience obtained in positions that are not full-time professional geological positions, the applicant is responsible for indicating clearly the actual time or percentage of time devoted to geologic duties within such positions, and for giving adequate descriptions of the geologic functions.) For the GS-1301, Professional Physical Science Series: Have successfully completed a bachelor's degree or higher in physical science, engineering, or mathematics that included 24 semester hours in physical science and/or related engineering science such as mechanics, dynamics, properties of materials, and electronics. OR Have a combination of education and experience with education equivalent to one of the majors shown above that included at least 24 semester hours in physical science and/or related engineering science, plus appropriate experience or additional education. Additional Information This position is covered by the Department of Defense Priority Placement Program. Additional vacancies may be filled by this announcement. This position is eligible for part time, full time or ad-hoc telework at the discretion of management. Recruitment incentives may be authorized to eligible new hires. A relocation incentive is generally a single payment intended to offset some of the relocation costs experienced by the selectee. A relocation incentive may be authorized. A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments. If you are unable to apply online and request information about the Alternate Application process, please contact the Department of Navy's Employment Information Center. Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at: http://www.secnav.navy.mil/donhr/Documents/CivilianJobs/FedCivAnnuitants.pdf ICTAP Applicants: To be considered well-qualified and exercise selection priority as an ICTAP candidate, displaced Federal employees must satisfy all qualification requirements for the position and receive a rating in the highly qualified category (score 85) or higher. ICTAP candidates must provide copies of all of the following documentation at the time of application: 1) agency notice; 2) most recent performance appraisal; and 3) most recent SF-50 or notification of personnel action that includes position, grade level, and duty location. Applicants who do not provide this documentation will not receive consideration as an ICTAP candidate. For more information about ICTAP eligibility please review the following link: https://www.usajobs.gov/Help/working-in-government/unique-hiring-paths/federal-employees/ictap/ Military Spouse Preference applicants will be placed at the highest grade for which they have applied and are determined Best Qualified (BQ). A BQ military spouse possesses knowledge, skills, abilities, and competencies comparable to others who meet the competitive referral criteria for the specific position. PPP applicants will be placed at the FPL, if determined Well Qualified (WQ). To receive priority consideration, the FPL must be the same grade level or equivalent of the retained grade or the grade held immediately prior to separation.